Aokai Drying


  • 3(6).jpg
  • 4(5).jpg
  • 5(6).jpg

编号 :



It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories.


$ 0


$ 0

Keywords: drying equipment | vacuum drying | oven






  • Descriptions
  • General Descriptions
  • Application
  • Technical parameters
  • Sketch map for inseallation
    • Commodity name: HYG ROTARY DRYER
    • Commodity ID: 1046717609623248896
  • 1, drum dryer a high degree of mechanization, production capacity;

    2, the fluid through the cylinder resistance is small, low functional consumption;

    3, the applicability of the material properties are relatively strong;

    4, the operation is stable, the operation cost is low, the product dry uniformity is good.

  • Applicable to the chemical industry, metallurgy, building materials, light industry and powder, granular, massive and into the dry material paste paste material. In the chemical industry, such as sulfuric acid, sulfuric acid, nitric acid, urea, oxalic acid, potassium dichromate, polyvinyl chloride, dioxins, calcium carbonate, phosphate, ordinary superphosphate, Three satisfied, such as sodium triphosphate dry.

    working principle:

    As shown in the figure, the wet material to be dried is fed through a screw conveyor to the feed box of the H-G dryer and into the drum, which is a slightly inclined cylinder. The material and the heating medium are fully contacted by the action of the board in the cylinder, and the contact method has countercurrent contact and co-current contact according to the characteristics of the material. With the rotation of the cylinder, the material moves under gravity to the lower end, the wet material in the process of moving, from the heating body to absorb heat, so that water can be evaporated and dried. Followed by the material out of the box. The heating body absorbs water and discharges the cylinder as exhaust gas. Exhaust gas into the atmosphere before the dust can be arranged after the dust removal device. Depending on the requirements for tail dust content, the combination of dust removal equipment can be selected. (Such as the requirements of lower dust content, the exhaust gas can be first treated by cyclone dust, and then by the pulse bag filter or water curtain dust collector after further disposal emptying).


    Heat source

    Steam, electricity, hot air stove or other industrial waste heat.

    Heating body:

    Hot air, flue gas and so on




Copyright©2022 Changzhou Aokai Drying Equipment Co.,Ltd.   IPv6 is supported
Copyright©2022 Changzhou Aokai Drying Equipment Co.,Ltd.
  IPv6 is supported

Powered by:   Changzhou  |  SEO


Support hotline:


Contact: Ms. Chang

+86 13921098210