LPG SERIES HIGH-SPEED CENTRIFUGAL SPRAY DRYER
It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories.
- General Descriptions
- Technical parameters
- Sketch map for inseallation
- Commodity name: LPG SERIES HIGH-SPEED CENTRIFUGAL SPRAY DRYER
- Commodity ID: 1046717066012090368
1, the drying speed, the material by atomization, the surface area greatly increased in the hot air flow, the head can be evaporated between 95% -98% of the water, the drying time to complete only a few seconds, especially for heat-sensitive materials Dry.
2, the product has a good uniformity, mobility and solubility, product purity, good quality.
3, the production process is simplified, easy to operate and control. For wet content of 40-60% (special materials up to 90%) of the liquid can be dried into a powder product, dry without grinding and screening, reduce production processes and improve product purity. The product size, bulk density, moisture, within a certain range can be changed by changing the operating conditions to adjust, control and management are very convenient.
The air is filtered and heated to enter the top air distributor of the dryer, and the hot air is evenly inserted into the drying chamber. Liquid material through the top of the tower at the top of the high-speed centrifugal atomizer, (rotating) spray into a very fine mist beads, and hot air in parallel contact, in a very short period of time can be dried for the finished product. The finished product is continuously discharged from the bottom of the drying tower and the cyclone, and the exhaust is drained by the fan.